Long Sleeve
Long Sleeve Hi-Vis T-Shirts - Class 2, Class 3 & Enhanced Visibility
Long sleeve hi-vis t-shirts add arm coverage to standard high-visibility apparel — useful for sun protection during long outdoor shifts, an added layer of abrasion resistance, and in some cases, a compliance requirement. ANSI/ISEA 107 Class 3 garments specifically require retroreflective material to extend onto the arms so a worker is recognizable as a human form from a greater distance and in any body position — which is why nearly all Class 3 t-shirts are long sleeve by design, while Class 2 is commonly available in both sleeve lengths.
Our long sleeve collection spans every certification level:
- ANSI Class 2 long sleeve — for workers exposed to traffic at 25–50 mph or complex visual environments, with reflective tape on the torso and sleeves.
- ANSI Class 3 long sleeve — maximum visibility coverage for highway-speed traffic, night work, and reduced-visibility conditions, with the most reflective tape coverage extending across the chest, back, and full sleeve length.
- Enhanced visibility (non-ANSI) long sleeve — bright fluorescent colors for general visibility and worker identification in lower-risk settings where ANSI certification isn't required, at a lower price point than certified styles.
Fabric matters for comfort during long outdoor shifts: look for moisture-wicking birdseye mesh polyester for breathability in warm weather, since long sleeves can trap more heat than short-sleeve styles without proper ventilation built into the fabric. Long sleeve hi-vis shirts also double as functional sun protection for outdoor workers — covering the arms reduces UV exposure during multi-hour shifts compared to short sleeves alone.
Use the filters on this page to sort by ANSI class, fabric, pocket configuration, and brand. For warm-weather work where arm coverage isn't a priority, see our Short Sleeve Hi-Vis T-Shirts collection instead.
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
PIP Non-ANSI Hi Vis Long Sleeve T-Shirt 310-1100
PIP
$12.12The 310-1100 is a NON ANSI long sleeve safety t-shirt by PIP and is made with 100% polyester birdseye mesh which is a durable, lightweight performance moisture wicking material. 1 Chest pocket is featured on the front. A reliable garment that can be...$12.12
Long Sleeve Hi-Vis T-Shirts — Frequently Asked Questions
In practice, almost always yes. ANSI/ISEA 107 Class 3 requires retroreflective material to extend onto the arms, not just the torso, so a worker's human shape and movement are recognizable from a greater distance. There typically isn't enough surface area on a short-sleeve or sleeveless garment to both meet the minimum 310 square inch reflective tape requirement and cover the arms appropriately — which is why the overwhelming majority of compliant Class 3 t-shirts are long sleeve. Always check the sewn-in label to confirm the specific class and type rather than assuming based on sleeve length alone.
They can be warmer than short sleeve styles in direct heat, but most long sleeve hi-vis shirts are made from lightweight, moisture-wicking polyester, often in a textured birdseye mesh weave that promotes airflow. Many workers actually find long sleeves more comfortable in direct sun during extended outdoor shifts, since the fabric blocks UV exposure that would otherwise hit bare arms — sunburn and heat from direct sun exposure can be more uncomfortable over a full shift than the marginal warmth added by sleeve fabric, particularly with a breathable moisture-wicking material.
ANSI-certified long sleeve shirts (Class 2 or Class 3) have been tested to meet specific minimum requirements for fluorescent background material and retroreflective tape area, and carry a sewn-in label confirming the standard, type, and class. Enhanced visibility shirts use the same bright fluorescent colors but have not been tested or certified to ANSI/ISEA 107 — they provide general visibility and worker identification but cannot be used to satisfy a job site's ANSI compliance requirement. If your employer or job site mandates ANSI-compliant hi-vis apparel, verify the certification label before purchasing rather than assuming bright color alone is sufficient.
Yes — many workers wear a long sleeve hi-vis shirt as a standalone outer layer in mild weather, then add a hi-vis or standard jacket on top in colder conditions. If your job requires the outermost garment to be ANSI-certified, make sure the jacket itself carries the required class — wearing an ANSI shirt underneath a non-certified jacket does not satisfy the visibility requirement if the jacket covers the certified material. For consistent compliance regardless of layering, consider a hi-vis jacket that itself meets the required ANSI class as your outer layer.
A chest pocket is purely a functional preference and does not affect ANSI compliance either way. Workers who carry small items like a phone, pen, or radio often prefer a pocketed style for quick access. No-pocket styles offer a slightly cleaner look and can be marginally more comfortable for workers who wear a harness, tool belt, or vest over the shirt where a pocket might create unwanted bulk or pressure points. Choose based on personal preference and what you typically need to carry during a shift.